| WebIO Network Installation |
|
|
| WebIO Application Downloads - KeyOn |
WebIO -
KeyOn Software
|
|
KeyOn is a software application for Windows XP/Vista/7.
KeyOn provides for advanced configuration of WebIO v4, sensor monitor and control automation.
KeyOn receives WebIO wireless sensor events from a WebIO installed on a local or remote network.
KeyOn provides email/SMS/text message notification based on WebIO wireless sensor readings.
KeyOn also provides for WebIO Expansion port setup.
WebIO KeyOn PC app for WebIO v4 (v0.18, 10/6/2010)
WebIO KeyOn manual (PDF) v0.18
|
|
|
|
| WebIO Application Downloads - Temperature Monitor |
WebIO -
Temperature Monitor Software
|
|
WebIO-TM is a software application for Windows XP/Vista/7.
WebIO-TM provides for advanced configuration of WebIO v3, wireless temperature and humidity
sensor monitor and control automation.
WebIO-TM receives WebIO wireless sensor events from a WebIO installed on a local or remote network.
WebIO-TM provides email/SMS/text message notification based on wireless sensor temperature readings.
WebIO-TM also provides for WebIO Expansion port setup.
*NEW* WebIO-TM v1.30 adds support for both secure (SSL) and unsecured email servers, improved automation setup
and WebIO Expansion Port Relay automation.
WebIO Temperature Monitor manual (PDF)
WebIO Temperature Monitor manual (HTML)
WebIO Temperature Monitor PC app for WebIO v3.5 (v1.30, 3.6MB)
Use for receiving WebIO UDP network temperature messages,
automation, email notification, logging and graphing.
To Install, download WebIO-TM_Install_v130.zip, unzip and run: WebIO-TM Install.msi
WebIO Temperature Monitor PC app for WebIO v3 (v1.02)
Use for polling (HTTP) WebIO sensors and email notification.
|
|
A Solar Thermal Heating Panel Project
Interenting information on WebIO v3 used to automate a solar thermal heating panel.
Solar thermal heating project
|
|
| WebIO Application Downloads - WebIO Finder |
WebIO -
Finder Software
|
|
WebIO Finder is a PC software application for discovering the IP Address
of WebIO units on your local area network.
This app will find WebIO units of versions v2.3 and v4.
V3 units will also be found when Finder is switched to listen on UDP port 4040.
If you are already using KeyOn or WebIO-TM you do not need this app to locate
your WebIO v3 or v4.
WebIO Finder also provides an app interface to X10 control by connecting
to your local WebIO.
WebIO Finder runs on Windows XP/Vista/7, using the Microsoft .NET framework.
WebIO Finder (v1.0, 2MB)
|
|
Finder is geared as a simple app for finding LAN connected WebIO units.
|
|
| WebIO Setup Application |
WebIO -
Setup Application
WebIO Setup is a Windows 98/XP PC software app for configuring WebIO v2.
It is recommend to instead use WebIO Finder if your using Windows XP/Vista/7.
WebIO Setup App and Installation Instructions
|
|
WebIO History
The first Working prototype
was built Jan. 27, 2001
Archive
|
|
|
